Video Input
Video System Selection
1 | Press the MENU button to display the |
|
| Use the Point ed buttons to select Input and then | AV System menu (Video or |
| press the Point 8 or the SELECT button. |
|
2 | Use the Point ed buttons to select System and then |
|
| press the Point 8 or the SELECT button. |
|
3 | Use the Point ed buttons to select the desired system |
|
| and then press the SELECT button. |
|
Video Jack or S-video Jack
Auto
The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43,
Y, Pb/Cb, Pr/Cr Jacks
AV System menu (Y, Pb/Cb, Pr/Cr)
Auto
The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.
When the Video System is 1035i, 1080i or 1080p, select the system manually.
Y, Pb/Cb, Pr/Cr SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, 1080i, and 1080p.
✔Note:
The AV System Menu cannot be selected when selecting RGB (Scart).
46
