SUPERIMPOSE DISPLAY
Selecting the Superimpose Display
You can select to display or not the date, time and number of alarm recordings.
Changing the Superimpose Display Position
1 Turn the power on to all i
1 Turn the power on to all devices used. | ||
| 2 Set ONtheSCREEN switch to the“ON” position. | |
2 PressMENUthebutton to display the MAIN MENU. |
| ø The superimpose display appears. |
|
| |
3 Pressl the(orj) button to select the | ||
“2.DISPLAY/SW OUT SET” line, then press the |
| |
| 15:20:00 | |
|
| |
ENTER button. |
|
|
ø The (DISPLAY/SW OUT SET) menu appears. |
|
|
<DISPLAY@SET>@@@@SET@UP
DATE@@@@@@@@@@@@@Y
TIME@@@@@@@@@@@@@Y
ALARM@COUNT@@@@@@Y
<SW@OUT@SET>
TIMING@@@@@@@@@@@FIELD
FIELD@@@@@@@@@@@@1
OUTPUT@@@@@@@@@@@Y
3 To change the displaySHIFT « posi (or]) button.
øThe display will move towards the right (or the bottom).
4PressENTERthebutton.
5 Pressl |
| NOTES: | |
the(orj) button to select the desired | |||
mode, then ENTERpressbuttonthe. | œ If SHIFTthe« (or]) button is kept pres | ||
second or more, the display wil | |||
SET UP . . | . . . . . . . . . Set each item (Individual) | ||
speed. | |||
|
| ||
ALL Y . . . . . | . . . . . . . . . To set all items to“Y” | œ The display position cannot be | |
|
| ||
ALL N . . . . . | . . . . . . . . . To set all items to “N” | recording. | |
øIf using the “SET UP” setting, continue with steps 6 to 8.
6 Pressl the(orj) button until the item to be changed is highlighted,ENTER then press the
button.
7 Pressl the(orj) button“Y” (displayed)to setor “N” (not displayed), then press the ENTER button.
DATE . . . . . . . . . . . . . . The date appears
TIME. . . . . . . . . . . . . . . The time appears
ALARM COUNT . . . . . . The number of alarm recordings appears
8 Repeat6stepsand7when setting other items.
9 When finished,MENU EXITpressbutton. the
NOTE:
œIf ONtheSCREEN switch is set to the“ON” position, the items for which “Y” have been set are recorded.
The items for which “N” was set at step 7 above are
not recorded.
English | 13 |