NORMAL RECORDING

Tape Counter Notes:

Action to Take when the Video Signal

œ There is no tape counter indication for the blank

portions of the tape.

Deteriorates

If there is no video signal during recording or when a

 

œ The tape counter indicates real hours, minutes and

seconds.

menu is not displayed (in stop, fast forward or rewind

modes, etc.),“VIDEO LOSS” can be displayed

œThere may be a slight discrepancyon-screen. If inbetweenthe (WARNINGtheOUT/EJECT SET) menu, position shown on the tape counter“VIDEO LOSS” isandset to “Y”,the outputactualat the WARNING

tape position.

OUT terminal becomes 0V (Low) (Refer to“WARNING

 

OUT Terminal” on page 34).

œ When rewinding the“0:00:00”tapeposition,past the

minus (–) sign will be displayed.

1 PressMENUthebutton to display the MAIN MENU.

œ When the counter is displayed2 Presson thel the(orj)digibutaltondisplayto“3.GENERALselect the

panel, pressCOUNTERtheRESET button to reset it

SET” line, then press the ENTER button.

to 0:00:00.

ø The (GENERAL SET) menu appears.

 

 

<GENERAL@SET>

 

TAPE@IN@MODE@@@@@STOP

 

TAPE@END@MODE@@@@REW

 

CLOCK@ADJUST@@@@@01:00

 

THREAD@CHECK@@@@@N

 

VIDEO@LOSS@@@@@@@N

 

REMOTE@@@@@@@@@@@MENU

 

VIDEO@@@@@@@@@@@@COLOR

3 Pressl the(orj) button “VIDEOuntilLOSS”the setting is highlighted, then press the ENTER button.

4 Pressl the(orj) button to select the mode, then ENTERpressbuttonthe.

N. . . . . . . . . . The video loss warning is not active.

Y. . . . . . . . . . The video loss warning is active.

5PressMENUtheEXIT button.

20

English