OUTPUT TERMINALS
WARNING OUT Terminal
œTheWARNING OUT terminal output becomes 0 V (Low) in accordance with the (WARNING OUT/EJECT SET) menu.
VIDEO LOSS . . . . . The output becomes 0 V and “V” appears on the digital display when there is no video signal
7 Repeat5stepsand6when setting ot
WARNING OUT Terminal Output Setting
1PressMENUthebutton to display the MAIN MENU.
2Pressl the(orj) button to“4.WARNINGselect
OUT/EJECT SET” line, then press the ENTER button.
øThe (WARNING OUT/EJECT SET) menu appears.
<WARNING@OUT@SET>SET@UP
ALARM@@@@@@@@@@@@Y
NON@REC@@@@@@@@@@N
MECHA.PROBLEM@@@@Y
VIDEO@LOSS@@@@@@@Y
<EJECT@SET>
EJECT@MODE@@@@@@@EJECT1
OPERATION@@@@@@@@SLAVE
3PressENTERthebutton.
4Pressl the(orj) button to select mode, then ENTERpressbuttonthe.
SET UP . . . . | Set each item |
ALL Y . . . . . . | To set all items to“Y” |
ALL N . . . . . . | To set all items to “N” |
œ If using“SET UP”thesetting, continue with steps 5 to7.
5 Pressl the(orj) button until the output is highlighted,ENTER buttonthen.
6 Pressl the(orj) button“Y” (warningto setis given) or “N” (warning is not given), then press the
ENTER button.
ALARM. . . . . . . . . . . The output becomes 0 V and “A” appears on the digital display during alarm recording
NON REC . . . . . . . . The output becomes 0 V and “N” appears on the digital display if the VCR enters a mode other than recording (i.e. recording pause, stop mode, etc.) during recording
MECHA. PROBLEM . . . The output becomes 0 V and “M” appears on the digital display when the tape stops or other problem with the internal mechanism
8 When finished,MENU EXITpressbutton. the
NOTES: the
œThe“VIDEO LOSS” line does not appear if “VIDEO LOSS” is set to “N” in the (GENERAL SET) menu.
œDisplays on the digital displa other displays.
œCanceling warning displays and
PressSTOPthebutton once.
The warning display disappears from the digital display.
Press theSTOP button once more.
If “MECHA. PROBLEM” warning is being output, then output stops.
œIf “NONtheREC”, “VIDEO LOSS” or “ALARM” the desired
warning is being output, the condition immediately
before the warning output is restored and the output stops.
œIf the system has shut down
“MECHA. PROBLEM” warning, the output is canceled when the ALL RESET button is pressed.
item for warning press the
34 | English |