TROUBLESHOOTING GUIDE
If the unit does not operate normally when you follow the instructions indicated in the manual, please refer to the table below.
SYMPTOM | POSSIBLE CAUSE | CORRECTIVE ACTION | |
|
|
| |
No power | The power cord is not connected | Connect the power cord | |
|
|
| |
No image displayed on | The connections are not correct | Check that all connections are correct | |
the TV monitor |
|
| |
The power to the camera and/or TV | Turn all connected devices power on | ||
| |||
| monitor is not turned on |
| |
|
|
| |
The buttons do not | A cassette tape is not loaded | Load a cassette | |
respond |
|
| |
All functions are suspended due to | Wait for the“À” indicator to go off | ||
| |||
| condensation |
| |
|
|
| |
| Alarm recording | Wait for the alarm recording to end | |
|
|
| |
| Unit in menu mode | Press the MENU EXIT button. | |
|
|
| |
| The security lock is engaged | Cancel the security lock | |
|
|
| |
Recording is not | The loaded cassette has no | Load a cassette tape with an | |
possible (the tape is | |||
ejected) |
| hole with adhesive tape | |
|
|
| |
Recording is not | “Y” is selected for the tape management | Normally. Refer to “TAPE MANAGEMENT” | |
possible (Tape rewinds) |
| on page 16. | |
|
|
| |
Autorepeat recording is | “AL” appears on the digital display | Display (ALARM LOG) menu, then press | |
not possible |
| the MENU RESET button to turn off the | |
|
| “AL” indicator | |
|
|
| |
Alarm recording is not | “OFF” appears on the digital display | Press the EJECT, STOP, FF, REW or | |
possible |
| PLAY button to turn the indicator off | |
|
|
| |
Noise in the playback | The video heads need cleaning | Clean the video heads | |
picture |
|
| |
|
|
| |
The date and time are | Display mode not set. | Set theON SCREEN switch to the“ON” | |
not recorded |
| position. | |
|
|
| |
The cassette tape | Problem with the system | Unplug the power cord then plug it back in | |
cannot be ejected |
|
| |
|
|
| |
The cassette is ejected | The tape is not threaded correctly | Try inserting the cassette one more time or | |
a few seconds after it |
| using a new cassette. If it is ejected again, | |
has been inserted |
| please consult your dealer. | |
|
|
|
System Down
If the unit does not function at all, try the following.
1 Unplug the power cord then plug it back in.
2 Reset the memoryALL RESET. (Pressbutton. the
Under normal conditions, do not touch theALL
RESET button.)
The time and date will be reset, and the security lock will be canceled.
3 If the problem is not corrected after performing step 1 and2a few times, consult your dealer.
38 | English |