ALARM RECORDING
By connecting theALARM IN terminal to a normally | NOTES: | |
open door switch, an interphone, etc., a recording can be | œ During alarm recording all but | |
done only when necessary. | œ If“OFF” appears on the digital display, alarm | |
| ||
Alarm Recording Setting | recording is not possible in order to prevent the | |
recorded tape to be recorded over. To cancel the | ||
Alarm recording is performed when there is an input | “OFF” display, press the STOP, EJECT, FF, REW or | |
(trigger) at theALARM IN terminal. | PLAY button. | |
| œ If an alarm trigger is receive | |
œ Make all necessary connections. | ||
| in progress, recording durati | |
œ The alarm triggers are received while in recording and | ||
stop modes. | will be calculated from that p | |
will register the alarm, but i | ||
œ FollowBeforethestarting steps, under“NORMAL | ||
an alarm scan and alarm search. | ||
RECORDING”. | œ If there is a power failure du | |
1 PressMENUthebutton to display the MAIN MENU. | ||
the power is restored within | ||
| duration, alarm recording will | |
2 Pressl the(orj) button to select the | ||
“5.ALARM/SERIES REC SET” line, then press the | œ If the alarm recording duratio | |
ENTER button. | may not be found during an ala | |
ø The (ALARM/SERIES REC SET) menu | search. If the alarms are goin | |
alarm scan or alarm search, th | ||
appears. | ||
more recording duration shoul | ||
| ||
<ALARM/SERIES@REC@SET> | œ To do alarm recording during s | |
*ALARM@SET | ||
@@MODE@@@@@@@@@@@Y |
| |
@@DURATION@@@@@@@20S | “MODE” to “Y”. Alarm recording will be conducted | |
*SERIES@REC@@@@@@N | ||
only if the VCR is recording. | ||
*TAPE@END@OUT@@@@8:00 | ||
|
23