CLOCK ADJUSTMENT
The time for the second and subsequent VCRs can be set to the same time as the first VCR.
A signal from a separate device can also be used to set the time for the second and subsequent VCRs to the same time as the first VCR. When using the signal from a separate device to set the time, input a 0 V signal to the CLOCK IN terminal of the first VCR for 100 ms or longer.
1PressMENUthebutton to display the MAIN MENU.
2Pressl the(orj) button to“3.GENERALselect
SET” line, then press the ENTER button.
3Pressl the(orj) button “CLOCKuntil the
ADJUST” setting is highlighted, then press the
ENTER button.
Example
<GENERAL@SET>
TAPE@IN@MODE@@@@@STOP
TAPE@END@MODE@@@@REW
CLOCK@ADJUST@@@@@03:00
THREAD@CHECK@@@@@N
VIDEO@LOSS@@@@@@@N
REMOTE@@@@@@@@@@@MENU
VIDEO@@@@@@@@@@@@COLOR
5PressMENUtheEXIT button.
The setting procedure on the first VCR is now thecompleted.
6 Repeat the procedure for a “CLOCK ADJUST” (to the same time as set on the
first VCR).
4 Pressl the(orj) button to set the NOTE:hour at which
the adjustment will be conducted, then press | the | |
ENTER button. | œ This function | will not operate |
saving/standard time is change | ||
NOTE:
Connection
œ The clock adjustment“00:00”cannot.be set to