Sanyo SRC-800A OUTPUT TERMINALS, TAPE END (SERIES) OUT Terminal, COM Terminal, NOTES:

OUTPUT TERMINALS

TAPE END (SERIES) OUT Terminal

NOTES:

œIf “SERIESthe REC” is set to “Y” in the

œDuring recording, when the end of the tape is reached or when the tape counter reading(ALARM/SERIESindicatesREC SET)8 menu,hours,the output the output becomes 0V (Low). Duringbecomes 0 Vautorepeat(Low) for about 2 seconds when the recording, the output becomes 0counterV (Low)reaches “8:00:00”,forevenaboutif the “TAPE2

seconds only.		END OUT” is set to “END”.
		œ If “SERIESthe REC” is set to “Y” in the
œ To reset the output,STOP or EJECTpressbutton. the
		(ALARM/SERIES REC SET) menu, the output
TAPE END OUT Terminal Output Setting		becomes 0 V (Low) until 5 minutes have passed
TAPE END OUT Terminal Output Setting		after the tape reaches the end.
1 PressMENUthebutton to display the MAIN MENU.	5	Press the
	5	MENU EXIT button.

2 Pressl the(orj) button to select the

“5.ALARM/SERIES REC SET” line, then press the

ENTER button.

øThe (ALARM/SERIES REC SET) menu appears.

*ALARM@SET

@@MODE@@@@@@@@@@@Y

@@DURATION@@@@@@@20S

*SERIES@REC@@@@@@N

*TAPE@END@OUT@@@@8:00

COM Terminal

œCommon GND (ground) terminal other terminals to external de

3 Pressl the(orj) button “TAPEuntilEND OUT”the setting is highlighted, then press the ENTER button.

4 Pressl the(orj) button to select the desired mode, then ENTERpressbuttonthe.

8:00 . . . . . . . The output becomes 0 V (Low) when the tape counter reaches “8:00:00” and/or when the tape reaches the end.

END . . . . . . . The output becomes 0 V (Low) when the tape reaches the end.

English