Sanyo SRC-800A Setting the Mode at the End of the Tape, Setting the video input signal

NORMAL RECORDING

You can select the mode on the VCR when the tape reaches the end during recording.

The video input signal during recording can be set to either color or black & white.

1PressMENUthebutton to display the MAIN MENU. 1 PressMENUthebutton to display the MAIN MENU.

2Pressl the(orj) button to“3.GENERALselect the2 Pressl the(orj) button to“3.GENERALselect the

SET” line, then press the ENTER button.

øThe (GENERAL SET) menu appears.

<GENERAL@SET>

TAPE@IN@MODE@@@@@STOP

TAPE@END@MODE@@@@REW

CLOCK@ADJUST@@@@@01:00

THREAD@CHECK@@@@@N

VIDEO@LOSS@@@@@@@N

REMOTE@@@@@@@@@@@MENU

VIDEO@@@@@@@@@@@@COLOR

3 Pressl the(orj) button “TAPEuntilEND the MODE” setting is highlighted, then press the ENTER button.

SET” line, then press the ENTER button.

øThe (GENERAL SET) menu appears.

3 Pressl the(orj) button “VIDEO”untilsettingtheis

highlighted, then press the ENTER button.

4 Pressl the(orj) button to select the mode, then ENTERpressbuttonthe.

COLOR . . . . For recording in color

B/W . . . . . . . For recording in black & white

5PressMENUtheEXIT button.

		NOTES:
	4 Pressl the(orj) button to select the desired
	mode, then ENTERpressbuttonthe.	œ Set“COLOR”to for systems which include color
	œ Setting when not using Autorepeat recording	signals (including cases where black & white signals
	œ Setting when not using Autorepeat recording	are mixed in), and set to “B/W” for systems which only
	REW. . . . . . . Rewinds the tape to the	are mixed in), and set to “B/W” for systems which only
	REW. . . . . . . Rewinds the tape to the	use black & white signals.
	beginning, then goes to stop mode	œ Use the same setting for reco

STOP . . . . . . Goes to stop mode

EJECT . . . . . The cassette is ejected

œSetting when using Autorepeat recording

REPEAT1. . . Autorepeat recording mode is automatically canceled if there was an alarm trigger

REPEAT2. . . Autorepeat recording mode is active even if there was an alarm trigger

5PressMENUtheEXIT button.

œIf tapes that have been record

played back when “COLOR”,the settingthei recordings will not be played back in color.

œIf using a black & “B/W”white. camer

Recordings will not be made in color even if “COLOR” is set.

English