AUTOREPEAT RECORDING
Autorepeat Recording
The same tape can be recorded over many times.
œFollowBeforethestarting steps, under“NORMAL RECORDING”.
NOTES:
œIf there is an alarm trigger d recording,“AL” and “A” flash on the digital display and
alarm recording starts. (Refer to “ALARM RECORDING” on page 23.)
1PressMENUthebutton to display the MAIN MENU. œ If “TAPEtheEND MODE” setting is “REPEAT1” and
2Pressl the(orj) button to“3.GENERALselect thethere is an alarm trigger, the recording will continue to
SET” line, then press the ENTER button. | the end of the tape, and then the tape will be rewound | ||
ø The (GENERAL SET) menu appears. | to the beginning and stop. “OFF” will be displayed on | ||
the digital display. | |||
|
| ||
| <GENERAL@SET> | To turn off the “OFF” display, press the STOP, | |
| TAPE@IN@MODE@@@@@STOP | ||
| EJECT, FF, REW or PLAY button. | ||
| TAPE@END@MODE@@@@REW | ||
| CLOCK@ADJUST@@@@@01:00 | ||
|
| ||
| THREAD@CHECK@@@@@N | œ If“AL” appears on the digital display and the “TAPE | |
| VIDEO@LOSS@@@@@@@N | ||
| REMOTE@@@@@@@@@@@MENU | END MODE” setting is “REPEAT1”, autorepeat | |
| VIDEO@@@@@@@@@@@@COLOR | ||
|
| recording is not possible. | |
3 Pressl | the(orj) button “TAPEuntilEND the |
| |
MODE” setting is highlighted, then press the ENTER |
| ||
button. |
|
| |
4 Pressl | the(orj) button “REPEAT1”to setor to |
| |
“REPEAT2” (Refer to “Setting the Mode at the End of the Tape.” on page 21), then press the ENTER button.
5PressMENUtheEXIT button.
6PressRECthebutton.
øRecording starts. When the tape end is reached, the VCR will rewind it to the beginning, and recording will resume.
øWhen the end of the tape is reached, “OFF” will be displayed and TAPE END OUT terminal output will 0 V, until the rewinding operation starts.
7To stop recording,STOP button. press the
22 | English |