OUTPUT TERMINALS
SW OUT Terminal
When recording, a pulse signal is output at theSW OUT terminal.
This terminal is usually connected to the switch input (SW IN) of devices like a camera switcher unit, or a quad compressor.
8 Pressl the(orj) button to select the
“OUTPUT” mode, then press the ENTER button.
Y. . . . . . . . . . When recording, a pulse signal is output.
N. . . . . . . . . When recording, a pulse signal is not output.
9PressMENUtheEXIT button.
ΦΙΕΛΔ: 16.7 ∝σεχ.
ΦΡΑΜΕ: 5 ∝σεχ.
5V (H)
(Output impedance: 5.7 Ω)k 0V (L)
SW OUT Terminal Output Setting
1PressMENUthebutton to display the MAIN MENU.
2Pressl the(orj) button to select the
“2.DISPLAY/SW OUT SET” line, then press the
ENTER button.
øThe (DISPLAY/SW OUT SET) menu appears.
<DISPLAY@SET>@@@@SET@UP
DATE@@@@@@@@@@@@@Y
TIME@@@@@@@@@@@@@Y
ALARM@COUNT@@@@@@Y
<SW@OUT@SET>
TIMING@@@@@@@@@@@FIELD
FIELD@@@@@@@@@@@@1
OUTPUT@@@@@@@@@@@Y
3 Pressl the(orj) button “TIMING”untilsettingthe
is highlighted, then press the ENTER button.
4 Pressl the(orj) button to select the desired output timing, ENTERthenbuttonpress. the
FIELD. . . . . . 1 pulse is output after each set
number of fields.
FRAME . . . . 1 pulse is output after each set number of frames.
5PressENTERthebutton.
6Pressl the(orj) button to select the desired pulse
signal interval (1, 2, 3, 4, 5, 10, 30 or 60), then press theENTER button.
œIf“TIMING” is set to FRAME (see step 4), “FRAME” will be indicated instead of “FIELD”.
7PressENTERthebutton.
Ενγλιση | 33 |