ALARM RECORDING
Alarm Search
To go to the beginning of a desired alarm recording.
1Press the SEARCH button during stop mode.
ø“AL SEARCH 01” appears on screen.
2Press the l (or j) button to set the desired alarm number (01 to 99), then press the FF (or REW) button.
øThe desired alarm is searched for and a still image of the beginning of the alarm recording appears
NOTE:
œThe alarm number is relative to the actual tape position. (Please refer to the illustration below.)
|
|
|
|
| Playback |
|
| |||
|
|
|
|
|
|
| ||||
| Alarm number 2 | 1 |
|
| 1 | 2 | ||||
Alarm |
| input point |
|
|
|
|
|
|
| |
trigger |
|
|
|
|
|
|
| |||
|
|
|
|
|
| |||||
|
| Rewind direction |
|
|
| |||||
|
|
|
|
| ||||||
Actual position | ||||||||||
|
|
|
|
|
|
| ||||
3Press the PLAY button.
øPlayback starts.
NOTES:
œIf the end of the tape is reached during a search, the tape will rewind and stop. If the beginning of the tape is reached, it will stop.
œThis function does not operate when a warning display appears on the digital display.
Alarm Scan
To look for an alarm recording by viewing the first 5 seconds of each alarm recording.
1Press the SEARCH button twice during stop mode.
ø“AL SCAN” will be displayed on screen.
2Press the FF (or REW) button.
øThe unit will advance (or rewind) the tape at high speed and playback the first 5 seconds of every alarm recording.
øTo cancel the alarm scan mode, press the STOP button.
3While the desired recording is being played back, press the PLAY button.
øPlayback starts and alarm scan mode is canceled.
NOTES:
œIf the end of the tape is reached during a scan, the tape will rewind and stop. If the beginning of the tape is reached, it will stop.
œThis function does not operate when a warning display appears on the digital display.
English | 25 |