Sanyo SRC-800A PLAYBACK, Normal Playback

1Turn on the power to the VCR and TV monitor.

2Load the video cassette tape.

3Press the PLAY button.

øPlayback starts.

øIf necessary, adjust the tracking to eliminate the noise from the picture.

øIf the image is unstable (rolling vertically), adjust the vertical lock control to correct.

4To stop playback, press the STOP button.

øTo advance (or rewind) the tape, press the FF (or REW) button.

NOTE:

œA tape recorded on a video cassette recorder produced by another manufacturer may not play back with the same degree of clarity on this unit.

Tracking Control

If there is noise in the image during playback,

1While looking at the playback picture, press the TRACKING+ button repeatedly to minimize the noise.

2If it cannot be minimized, press the TRACKING – button repeatedly.

NOTE:

œThis function does not operate when a warning display appears on the digital display.

Vertical Lock Control

During still image mode,

1Press the TRACKING+ button repeatedly to reduce the vertical rolling of the image.

2If it cannot be corrected, press the TRACKING – button repeatedly.

NOTE:

œThis function does not operate when a warning display appears on the digital display.

Picture Search (Forward and Reverse)

1Press the FF (or REW) button, during normal playback.

øThe image can be seen while the tape is advanced (or rewound) at high speed.

2To return to normal playback, press the PLAY button.

NOTES:

œDuring picture search, noise (horizontal bars) will appear in the picture.

œThe sound is muted.

Still Image

1Press the STILL/PAUSE button, during normal playback.

øA still image can be viewed.

2To return to normal playback, press the PLAY button.

NOTES:

œIf still mode continues for 5 minutes or more, the VCR will go into stop mode to avoid damaging the tape.

œIf the image is unstable (rolling vertically), adjust the vertical lock control to correct.

œThe sound is muted.

Field Advance (Forward and Reverse)

1Press the FF (or REW) button, during still image mode.

øThe still image is advanced (or rewound) of one image (field).

2To return to normal playback, press the PLAY button.

NOTES:

œDuring reverse field advance, noise will appear in the picture.

œIf field advance mode continues for 5 minutes or more, the VCR will switch to stop mode to avoid damaging the tape.

œThe sound is muted.

English