ALARM RECORDING

Alarm Recording Counter Display

Checking the Alarm Recordings Time

œDuring alarm“AL”recording,and “A” will be flashing on the digital display.

œIf a superimpose display

1PressMENUthebutton to display the MAIN MENU.

2Pressl the(orj) button to“7.OTHERS”select the

is being displayed and line, then press the ENTER button.

“ALARM COUNT” has been set to “Y” in the (DISPLAY/SW OUT SET) menu, the number of alarm recordings will flash on the monitor screen.

œ The maximum display number of

øThe (OTHERS) menu appears.

<OTHERS>

*ALARM@LOG

*POWER@FAILURE/DEW

alarm recordings is

“999”. At the next alarm recording the counter will indicate “000”.

œWhen the (ALARM LOG) menu appears, press the

MENU RESET button to reset the alarm counter to

“000” (all the data of the (ALARM LOG) menu is reset). 3 Pressl the(orj) button to“ALARMselect the

LOG” line, then press the ENTER button.

Connections to the ALARM IN Terminal

øThe (ALARM LOG) menu appears.

œ Alarm input signal

ø The number of alarm recordings, and the 10

most recent alarm recording times are

 

Connect a make-contact (no voltage) switch between

theALARM IN and COM terminals.

displayed.

Example

 

 

<ALARM@LOG>@@@@@@@@@010

 

@@@001@@@12-25@19:00

 

@@@002@@@11-25@23:00

 

@@@003@@@10-25@15:00

 

@@@004@@@10-25@08:00

 

@@@005@@@10-25@06:00

 

@@@006@@@10-22@19:00

 

@@@007@@@10-22@17:15

 

@@@008@@@10-22@15:45

 

@@@009@@@10-20@10:00

 

@@@010@@@10-18@12:00

œ Continue pressingl (orj) buttonthe to di the next (or previous) 10 ala When the number of alarm reco reaches 100, the older ones a ones are memorized.

4PressMENUtheEXIT button.

NOTE:

œIf MENUtheRESET button is pressed while the (ALARM LOG) menu is displayed, the displayed data is erased.“AL” will be erased from the digital display.

24

English