2Remove the upper copy guide.
3Insert the original face down into
the table along the size indication.
Do not release the original
until it is fed into the copier.
SSet a leading margin of 5 mm, 0.2" or more when you copy an original whose
leading edge has a large solidly-shaded area.
See page 11, "Setting a Leading/Trailing Edge Margin"

Recommended Paper

This section describes recommended paper sizes and types.
SStandard paper sizes that can be used in this copier are shown below.
Metric version Inch version Manual feed table Roll feeder
A0 E (36" × 48") KK
A1 D (24" × 36") KLKL
A2 C (18" × 24") KLKL
A3 B (12" × 18") KLKL
A4 A (9" × 12") KK
BASIC
COPYING 5