BASIC
Switching the Copy Exit
This function switches the copy exit direction to the upper or lower according to the copy paper size.
SSelect the lower copy exit when copying onto A0, 36" × 48" K or A1, 24" × 36" K paper. If you use the upper copy exit to copy onto these paper, delivered copies might remain inside the copier causing a paper jam.
SSelect the upper copy exit when copying onto A4 K or 9" × 12" K paper. If you select the lower copy exit, copies might not be stocked properly.
SWhen you turn on the copier, the message "upper copy exit" lights.
SYou can stock the following number of copies by using the upper copy exit. If you stock copies exceeding these numbers, the paper might be jammed or the image might be copied on the underside of the paper.
∙A4 L ~ A1 K , A L ~ D K - 25 sheets
∙Translucent paper - 10 sheets
SWhen you select the lower copy exit and take copies out of the rear side of the copier, you can stock up to 10 copies for A0, 36" × 48" K or A1, 24" × 36" K paper.
SWhen you select the lower copy exit and take copies out of the front side of the copier, you can stock only one copy.
SWhen you copy onto A3, short grain paper, you can stock less copies than those for A3, long grain paper.
1 Press the Copy Exit key to select the direction in which copies are delivered.
✏" " lights for the upper copy
exit and " " for the lower copy exit.
