WHEN A OR x IS LIT
A paper jam has occurred. The corrective action varies depending on the location having the misfed paper. Remove the paper according to the corre- sponding instruction shown below.
✏Be sure to remove the paper completely without tearing it. If a piece of the paper remains inside the copier, the paper jam might recur or another fault might occur.
RWARNING: Do not remove any covers or screws other than those specified in this manual. Some parts of the copier are at a
high voltage and could give you an electric shock. When the copier needs to be checked, adjusted or repaired, contact your service representative.
When removing misfed paper, do not touch the fusing section because it could be very hot.
SA location having misfed paper is shown by an indicator on the ope- ration panel.
SSeveral locations might be indicated simultaneously. Remove misfed paper from all of the locations.
SWhen you open the original table, paper path section, or rear cover, the copier turns itself off. However, the copy settings are kept stored.
SWhen you have removed misfed paper, the suspended copy settings are displayed. Resume copying without changing the settings.
SIf paper jams occur repeatedly, contact your service representative.
WHAT TO DO IF SOMETHING GOES WRONG 33
