DO’S AND DON’TS
SSince some parts of the copier are supplied with high electrical voltage, touch only the parts specified in this manual.
SWhile copying, do not turn off the main switch. When you turn off the copier, confirm that all copy runs have finished.
SDo not step on or trip on the power cord.
SDo not unplug the power cord even after copying. This copier has the anticondensation heaters to protect the internal parts from dew when the ambient temperature changes. If you unplug the power cord, the anticon- densation heaters do not work. However, disconnect the power cord for safety when you will not use the copier for a long period.
SDo not open the original cover, original table, paper path section, and roll feeder during copying. Otherwise, the copier stops a copy run causing a paper jam.
SDo not move or slant the copier during copying.
SDo not remove or attach from and to the copier any screws or parts other than those specified in this manual.
SDo not allow paper clips, staples, or other small metallic objects to fall inside the machine.
SDo not spill water or other liquid on the copier.
SDo not lean on the rear cover.
SDo not obstruct the ventilation hole by placing or leaning an object in front of the hole. The ventilation hole protects the temperature from rising inside the copier. If the temperature rises excessively inside the machine, a fault might occur.
MAINTAINING YOUR COPIER 51
