2Press the + and - keys to specify a leading edge margin.
✏Press the + key to increase the margin width and - to decrease the width.
✏If you enter a wrong value, press the Clear/Stop key and reenter a correct value.
3Press the Edge Margin key. The specified value goes on. The "Trailing Edge" indicator flashes when the "Synchro Cut" mode is selected.
✏You can start copying here when the "Manual Feed," "Preset Cut," or "Variable Cut" mode is selected.
4Press the + and - keys to specify a trailing edge margin.
✏If you enter a wrong value, press the Clear/Stop key and reenter a correct value.
5Press the Edge Margin key. The specified value goes on. Both margins are set.
BASIC
