WHEN THE "WAIT" INDICATOR IS LIT
You cannot start copying while the "Wait" indicator is lit.
Check indicators on the operation panel and take action according to the instructions shown below.
SIf no indicator is lit on the operation panel, check that the power is on.
Indication | Corrective action |
x is lit. | Remove the misfed paper. → See page 35. |
|
|
A is lit. | Remove the misfed original. → See page 34. |
|
|
C is lit. | Load paper in the roll feeder. → See page 38. |
|
|
D is lit or blinking. | Add toner. → See page 43. |
|
|
E is lit or blinking. | The toner bottle is filled with used toner. Contact your |
| service representative. |
|
|
M is lit. | Any cover is open at the roll feeder or other unit of the |
| copier. |
| Close the cover. |
|
|
L is lit. | Something goes wrong with the copier. Contact your |
| service representative. |
| The paper cut length indicator displays alphabetical |
| characters or numerals. You should also inform the |
| service representative of these values. |
|
|
u is lit. | Set the key counter. |
30 WHAT TO DO IF SOMETHING GOES WRONG
