Sceptre Technologies X42 user manual 110

	SCEPTRE X42 HDTV User Manual
Problems	Solutions
SWITCHING A	Different channels and inputs will sometimes have this effect
CHANNEL OR	because the channel signal’s own volume is already loud.
SOURCE	There is no way remove this completely. The TV has an
CHANGES THE	AUTO VOLUME LEVEL function that can combat this type of
VOLUME	effect. Please make sure that function is turned on.
THERE IS	When your LCD HDTV’s resolution is higher than the digital
NOISE OR	channel’s broadcast resolution, the signal is up-converted to
TRASH PIXELS	match your TV’s resolution. Up-converting can cause this
ON THE	type of effect. Please use the noise reduction subfunctions on
SCREEN	this TV to minimize this effect.
TIPS FOR HIGH	The X42 LCD HDTV is an ideal platform for viewing High
DEFINITION	Definition Content. The best image quality can be achieved
USERS	by HDMI, YPbPr (Component), then VGA. However, due to
	variances in broadcast practices, it is possible some image
	distortions can occur.
TIPS FOR	Letterboxed (Widescreen) versions of DVD movies are most
LETTERBOX	commonly formatted for standard 4:3 TVs. The X42 LCD
CONTENT	HDTV has the capability of expanding this content so the
USERS	entire screen is filled at the expense of the image proportion.
	To use this function press the aspect button on the remote
	control and cycle among the available options.
HDMI VIDEO IS	The TV does not decode Bitstream audio information. Double
FINE BUT THE	check your DVD player or cable/satellite box to make sure
SOUND IS PURE	that the audio is setup for PCM.
STATIC
	Your DVD player or cable/satellite set-top box is not
HDMI VIDEO	handshaking correctly with the TV. Please try unplugging the
FLASHES ON	power of your DVD player or cable/satellite set-top box, then
AND OFF	turning it back on. If this does not work, you’ll need to contact
	your cable or satellite company for more help.
	This TV does not have 2 TV tuners, therefore will not give you
PIP DOES NOT	2 channels at the same time. If you really need 2 channels at
GIVE ME 2	the same time, you can use the antenna for the TV tuner, then
CHANNELS AT	use a cable/satellite set-top box connected to another source
THE SAME TIME	of the TV, then use the cable remote and the TV remote to
	see both channels.
TV TURNS	The TV features a power saving mode which will automatically
ITSELF OFF	turn off the TV, if there’s no signal provided for more than 15
AFTER 15	minutes.
MINUTES

- 110 -

www.SCEPTRE.com