SCEPTRE X42 HDTV User Manual
IfYou Want the Better Connection with Component…
1.Make sure the power of X42 LCD HDTV and your
2.Obtain a Component Cable. Connect the green color connector to both your set- top box and Component 1’s green connector port off the back of your X42 LCD HDTV.
3.Connect the blue color connector to both your
4.Connect the red color connector to both your
5.Obtain a RCA Audio Cable. Connect the white color connector to both your set- top box and Component 1’s white connector port off the back of your X42 LCD HDTV to the right side of your green, blue, red component connection.
6.Connect the red color connector to both your
7.Turn on the X42 LCD HDTV and your
8.Use the remote control’s source button or the source button on the right side of the TV to switch to YPbPr 1.
Please Note :
•If Component 1 is already occupied, please use Component 2 as your connection port and switch to source YPbPr 2.
•Please reference the
•Sceptre’s X42 LCD HDTV supports SONY’s universal remote code. Please look up SONY’s codes in your universal remote’s hand book.
- 34 -
www.SCEPTRE.com