ALIGNING RIP FENCE
The fence should slide easily along the barsand always
remain in alignment (parallel to sawblade and miter gauge
grooves).
The alignment is maintained by a spring underneath the
fence which bearsagainst the front guidebar,
To move the fence, loosen the lock handle and graspthe
fence with one hand at the front.
For very close adjustments,grasp the guide bar with both
handsand movethe fence with your thumbs.
F
Placefence onsaw but DO NOT LOCK IT.
Move the REAR END of the fenceslightly to the right or
left ... when you release it, the fence should "spring"
back to itsoriginal position.
If it doesnot, the springpressuremust be INCREASED.
1. Loosen the screws.
2. Move Spring slightly toward front of fence.
12