Press guard onto support so that bottom of guard is
approximately 3/4 in. away from belt.
NOTE: To remove guard, lift up on LONG TABS of
cl ps ... pull guard outward. The clips should remain on the BELT GUARD SUPPORT.
1
3/_ IN.
PLUGGING IN MOTOR
1.From among the loose parts, find two wire ties
2.Route motor cord along right side of cabinet and snap ties in 1/4" hole in side of cabinet. Secure two cords in w_re ties.
3.Plug motor cord into outlet on side of switch box.
NIRE TIES
19
