Sears 73465, 72671 To Stop a Clean Cycle, How to Set the Oven for Cleaning, After a Clean Cycle

How to Set the Oven for Cleaning

Quick Reminder:

1.latch the door.

2.Turn the OVEN SET knob to CLEAN.

If the oven is too hot and you start to set a clean cycle, you wilt not be able to slide the latch°

Allow additional time for cooling before you try to set the cycler

1.Follow directions to prepare the oven for cleaning_

2.Slide the latch handle to the right as far as it will go. Never force the latch

handle. Forcing the handle	Ill_
will damage the door lock
mechanism.

3.Turn the OVEN SET knob to CLEAN. The SELF

CLEAN DOOR LATCH, AUTOMATIC OVEN,

OVEN ON and COOK TIME ON/OFF lights will glow_

NOTE: If you turn the OVEN SET knob before you slide the latch, the SELF CLEAN DOOR LATCH light will flash_ Slide the latch to the right°

Clean cycle time is normally 4 hours and

20 minutes. On some models you can change the Clean Time to anywhere between 3 hours and 5 hours,

and 59 minutes, depending on how dirty your oven is.

You have one minute to change your Clean Time.

Use the HOUR and MIN. pads to change the total Clean Time.

Both the OVEN ON light and the SELF CLEAN DOOR LATCH light wilt flash when the Clean Time is finished.

After using the dean cycle, the door latch and the OVEN SET knob must be returned to their original positions before you can use the oven.

When the SELF CLEAN DOOR LATCH light flashes, slide the latch handle to the left as far as it

will go, turn the OVEN SET knob to OFF and open the door.

Never force the latch handle. Wait until the SELF

CLEAN DOOR LATCH light flashes and the latch slides easily. Forcing the latch handle may damage the door lock.

To Stop A Clean Cycle

1.Turn the OVEN SET knob to OFE

2.Wait until the oven has cooled below the locking

temperature to unlatch the door° You will not be able to open the door right away unless the oven has cooled below the locking temperature.

After a Clean Cycle

You may notice some white ash in the oven. Just wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap-t_flled steel wool pad. Be sure to rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle,.

If the oven is not dean after one clean cycle, repeat the cycle.

NOTE:

•You cannot set the oven for cooking until the oven is coo! enough for the door to be unlatched°

•While the oven is self-cleaning, you can press the CLOCK pad to display the time of day. To return to the clean count down, press the COOK TIME

ON/OFF pad_

(c_ntinued next page)

25