SSL Scanner

4.5

Certificate List

The Certificate List options are invoked by clicking on the corresponding button under SSL Scanner:

If you want to enable any of these options, mark the checkbox that is on this button.

Then click on Apply Changes to make this setting effective.

These are policy-dependent options, i. e. they are configured for a particular policy. When you are configuring these options, you need to specify this policy.

To do this, select a policy from the drop-down list labeled Policy, which is located above the Certificate Verification button:

The options are arranged under the following tab:

They are described in the upcoming section:

• Certificate List, see 4.5.1

4–13