SSL Scanner
To make the addition valid for all policies, mark the checkbox labeled Add to all policies before proceeding any further.
Then click on either of these two buttons, according to whether you want to add the CA as trusted or not trusted:
—Trust
Click on this button to add a CA to the list as trusted.
—Do not trust
Click on this button to add a CA to the list as not trusted.
The list of trusted CAs is displayed at the bottom of this section.
To display only a particular number of list entries at a time, type this number in the input field labeled Number of entries per page and enter it using the Enter key of your keyboard.
If the number of entries is higher than this number, the remaining entries are shown on successive pages. A page indicator is then displayed, where you can select a particular page by clicking on the appropriate arrow symbols.
To sort the list in ascending or descending order, click on the symbol next to the Certificate Authority column heading.
To change the status of CA from trusted to not trusted or the other way round, mark or clear the Trusted checkbox in the same line.
Then click on Apply Changes to make this setting effective. You can edit more than one list entry and make the changes effective in one go.
Use the following items to perform other activities relating to the list:
•Filter
Type a filter expression in this input field and enter it using the Enter key of your keyboard. The list will then display only entries matching the filter.
•Delete Selected
Select the list entry you wish to delete by marking the Select checkbox next to it and click on this button. You can delete more than one entry in one go.
To delete all entries, mark the Select all checkbox and click on this button.