BEFORE USING THE MACHINE

SOFTWARE INSTALLATION

Note The screen images in this Guide are for Windows XP. The screen images for other Windows version are different.

1 The USB cable shall not be connected to the machine. Be sure that the cable is not connected before the installation.

If the machine is connected with the cable, the screen will display a Plug and Play window. In this situation, click the "Cancel" button to close the window, and disconnect the cable.

Note The USB cable is connected in step 10.

2 Insert the "Software CD-ROM" CD-ROM into your CD-ROM drive.

3 Click "start" button, click "my Computer" ( ), and then double click the CD-ROM icon ( ).

•In Windows Vista/7, click "start" button, click "Computer", and then double click the CD-ROM icon.

•In Windows 2000, double click "my Computer", and then double click the CD-ROM icon.

4 Double click "Setup" icon ( ).

In Windows Vista /7, if a message window appears asking for your confirmation, click "permit".

5 The language selection screen will appear. Select your desired language, and then click the "next" button.

6 Read the welcome message, and then click the "next" button.
7 Select the installation position, and then click the "next" button.8 When the "finish" screen appears, click the "finish" button.

9 Ensure that the machine is on, and connect the machine and your computer with the USB cable (page14).

Windows will detect the machine and display the Plug and Play screen.

10 Start to install the driver.

"SHARP AL-XXXX Scanner" appears in the "locate new hardware wizard" dialog box. Select "install the software automatically (recommended) ", and then click the "next" button. Operate according to the instructions on the screen.

The "locate new hardware wizard" dialog box appears again, displaying "SHARP AL-XXXX Printer". Select "install the software automatically (recommended) ", and then click the "next" button. Operate according to the instructions on the screen.

12