LOADING PAPER

When there is no paper on the feed tray, the "paper required" indicator ( ) will be on.

The output tray must be expanded before normal copying or printing operations, otherwise, the machine will not warm up.

PAPER

To achieve the best result, please use the paper recommended by SHARP.

Paper typeSizeWeightCapacity

Standard paper

A4

56g/m2 to 80g/m2 *1

40 pieces *2

 

A5

 

(Standard paper:

Recycled paper

 

A6

 

80g/m2, the feeding

 

 

 

8.5 × 11*4

 

height shall be less

 

5.5 × 5.5*4

 

than the paper guide

 

 

 

size limit.)

 

 

 

 

Thick paper*3

 

91g/m2 to 128g/m2

–

Thin paper

 

56g/m2 to 59g/m2

–

Labels

–

–

–

 

 

 

 

*1 When printing a large amount of copies or using the 80g/m2 paper, empty the output tray every time when 10 sheets have been printed. Otherwise, a pile-up error may occur.

*2 The quantity of paper loadable to the feed tray differs for different paper weights.

*3 If a feeding error occurs when using thick paper, you will need to load the paper one sheet at a time into the feed tray.

*4 Appliable for the inch system.

Special paper

Please observe the following standards when using special paper.

●When using paper not recommended by SHARP, please operate in single-sheet mode (do not try to perform continuous copying or printing)

●There are many types of special paper, some of which cannot be used in this machine. Before using special paper, please contact the authorized service department.

●Before using paper not recommended by SHARP, please carry out a copying test to check if it is suitable.

7