SCANNING FROM THE TWAIN COMPLIANT APPLICATIONS (PC scanning)

The SHARP scanner driver is compatible with the TWAIN standard, therefore scanning from the TWAIN compliant applications is possible. The steps for using certain applications for scanning may be different from the following steps. For details, please refer to the scanner driver help file or the help file of your applications.

1 Place the original that you wish to scan on the document glass.

For setting the original, please refer to "NORMAL COPYING" (Page15).

2 Open the TWAIN compliant application, and select "Select scanner" from the "File" menu.

The method for accessing the menu to select Note the scanner depends upon the application.

For more information, refer to the manual or the help file of your application.

3 Select "AL-XXXX 1.0(32-32)", and then click the "Selected" button.
5 Click the "Preview" button.

The preview image will appear.

Note

If the angle of the image is not correct, reset

the original, and click the "Preview" button

 

again.

6 Specify the scanning area and set the scan preferences.

For information on specifying the scanning area and setting the scan preferences, see Scanner Driver Help.

"SCANNER DRIVER SETTINGS" (Page31)

Scanning a large area at a high resolution will Note increase the volume of data and prolong the time needed for scanning. When selecting the scan preferences, it is advisable to reduce the resolution or specify a suitable scanning area.

7 When you are ready to begin scanning, click the "Scan" button.

 

Depending on your system, "AL-XXXX" or

•

To scan an ID card, press the "ID card"

 

Note "AL-XXXX 1.0 " may appear on the "Select

 

Note

button, and click the "Scan" key to scan one

 

Source" screen.

 

 

side of the ID card. Then turn the ID card

 

 

 

 

 

 

 

 

 

over on the document glass, and press the

4

Select "Acquire image" from the "File"

 

"Scan" key again to finish scanning.

•

To stop scanning, press the [CLEAR] key

 

menu of the application.

 

( ) or click [CANCEL].

 

The scanner driver setup screen will appear.

 

 

•

To cancel a scanning job after clicking the

 

"SCANNER DRIVER SETTINGS" (Page31)

 

"Scan" button, press the [Esc] key on your

 

 

 

keyboard.

 

 

•

For the restrictions on COPY/PRINT in the

 

 

 

SCAN mode or the restrictions on SCAN in

 

 

 

the COPY or PRINT mode, please refer to

"OPERATION IN COPY, PRINT AND SCAN MODE" (Page10).

30