REPLACING DRUM CARTRIDGES

Please replace the drum cartridge according to the following steps.

1 Open the cover of the machine and remove the toner cartridge.

2 Hold the green-marked position with your both hands and rotate in the direction of the arrow, and take out the old drum cartridge.

4 Insert the toner cartridge into the bayonet of the machine, press it down in the direction of the arrow until a "click" is heard. Gently lift support bar at the green-marked and pull to a half-closed postion, and then gently lift the bar again until the cover is completely closed.

Note

Before closing the cover, make sure that the

new drum cartridge is correctly installed.

 

Do not touch the surface of the drum (green Caution portion) of the drum cartridge when replacing

the drum cartridge. Doing so may damage the drum and cause smudges on copies.

3 Aim the new drum cartridge to the bayonet of the machine, insert it into the bayonet, rotate in the direction of the arrow and insert the drum cartridge until a "click" is heard.

5 Turn on the power, press the [DENSITY] key and [PHOTO MODE] key at the same time until all indicators except for [PHOTO MODE] indicator light on.

6 Press the [DENSITY] key again until the indicatiors return to normal status. Confirm whether the indicator of the drum cartridge is light off.

46