6

Chapter 6

ROUTINE MAINTENANCE

This chapter explains how to replace the toner and drum cartridge, clean the machine and store the supplies.

REPLACING TONER CARTRIDGES

Please replace the toner cartridge according to the following steps.

The following phenomena indicate that the cartridge has run out of toner, please replace it with a new cartridge. Note • When the "toner cartridge replacement required" indicator ( ) is on.

• If the copies show white lines, light-colored printing or fogged image.

1 Lift the document glass locking handle and open the cover of the machine.2 Remove the old cartridge following the upward direction of the arrow.

Grasp the cartridge grips when holding the Caution cartridge.

4 Hold the new cartridge by its grips, and insert it at a 45-degree angle towards the slot. Press it down until a "click" is heard.

 

If there is any dirt or dust

 

on the new toner

“Click”

cartridge, remove it

 

before installing the

 

cartridge.

5 Gently lift the support bar at the green-marks and pull to a half-closed position, and then gently lift the bar again until the cover is completely closed. Connect the power.

After removing the old cartridge, do not shake Caution it or tap it. Otherwise toner may leak from the cartridge. Immediately put the old cartridge in

the bag of the new cartridge. Dispose of the old cartridge according to local regulations.

The "toner cartridge replacement required" indicator ( ) will go out.

3 Take the new cartridge out of the bag,

 

 

grasp the cartridge on both sides and

 

• Before closing the cover, make sure that the

shake it horizontally five to six times.

Note

new toner cartridge is correctly installed.

 

Please give priority to

 

• Confirm whether the original is placed slant

 

or not when making copies again.

using the toner delivered

 

 

 

together with the

 

 

machine when using the

 

 

toner cartridge for the

 

 

first time.

 

 

45