Color Menu
Note: Factory default settings are shown in bold.
The printer automatically adjusts color balance and density at appropriate intervals, optimizing the printed output for bright white paper viewed in natural daylight conditions.
The items on this menu provide a means of changing the default settings for special or particularly difficult print jobs. Settings revert to their default values when the next print job is complete.
Item | Settings | Explanation |
|
|
|
|
|
|
DENSITY | AUTO | AUTO = image density is automatically |
CONTROL | MANUAL | adjusted: |
|
| • at power on |
|
| • when a new image drum or toner |
|
| cartridge is installed |
|
| • at intervals of 100, 300 and 500 drum |
|
| counts |
|
| Auto adjustment takes up to 55 |
|
| seconds. |
|
| Switch to manual only if you wish to |
|
| initiate Density Control manually using |
|
| the printer menu. |
|
|
|
ADJUST DENSITY | [EXECUTE] | Selecting this will perform the auto |
|
| density set up. |
|
|
|
AJST | [EXECUTE] | Performs automatic color registration |
REGISTRATION |
| adjustment. Normally this is done at |
|
| power on and when the top cover is |
|
| opened and then closed. This process |
|
| accurately aligns the cyan, magenta |
|
| and yellow images to the black image. |
|
|
|
C REG FINE | Performs fine adjustment of image | |
ADJUST | increments of 1 | timing in relation to the black image |
M REG FINE | Default = 0 | component. |
ADJUST |
| A positive setting will darken the color; |
Y REG FINE |
| a negative setting will lighten the color. |
ADJUST |
|
|
|
|
|
Sharp
104