Shading on unprinted sections
Possible cause | Remedy |
|
|
|
|
Paper has been | Store paper within specified temperature and |
affected by static | humidity levels. See “Specifications” on |
electricity. | |
|
|
Paper is too thick. | Use recommended paper. See “Paper (Print |
| |
|
|
Toner is low. | Replace toner cartridge. See “Replace a Toner |
| |
|
|
Toner rubs off when you rub the printed surface.
Possible cause | Remedy |
|
|
|
|
Media Weight and | Set the value of media weight in the menu to |
Media Type settings | the next heaviest one (MEDIA MENU → YYY |
may not be | MEDIA WEIGHT). |
appropriate. |
|
|
|
Packing materials were | Careful! Fuser my be HOT! |
left on the fuser when | Open the top cover and check to be sure that |
it was installed. | all the packing materials were removed from |
| the fuser. See “Replace the Fuser” on page 87. |
|
|
Ultra Heavy
If the Ultra Heavy setting does not give proper toner fusion, you can try the Label settings.
Sharp
153