Maintenance Menu
Note: Factory default settings are shown in bold.
Item | Settings | Explanation |
|
|
|
|
|
|
MENU RESET | [EXECUTE] | Resets menus to the default settings. |
|
|
|
SAVE MENU | [EXECUTE] | Saves current menu settings as default |
|
| values. At confirmation prompt, press |
|
| ENTER to confirm save, or CANCEL. |
|
|
|
POWER SAVE | ENABLE | Change this setting to Disable if you do |
| DISABLE | not want the printer to enter the power |
|
| save mode after the specified time. |
|
|
|
PAPER BLACK | Used for small adjustment when you | |
SETTING | increments of 1 | experiencse faded print or light specks / |
| Default = 0 | streaking in monochrome printing on |
|
| white paper. Select a higher value to |
|
| reduce fading, or a lower value to reduce |
|
| specks or streaking in high density print |
|
| areas. |
|
|
|
PAPER COLOR | As above, but for color printing. | |
SETTING | increments of 1 |
|
| Default = 0 |
|
|
|
|
TRANSPR | As above, but for mono printing on | |
BLACK | increments of 1 | transparencies. |
SETTING | Default = 0 |
|
|
|
|
TRANSPR | As above, but for color printing on | |
COLOR | increments of 1 | transparencies. |
SETTING | Default = 0 |
|
|
|
|
Sharp
111