System Adjust Menu
Notes:
•Factory default settings are shown in bold.
•Items with a dagger (†) only appear when the appropriate option is installed.
Item | Settings | Explanation |
|
|
|
|
|
|
X ADJUST | Adjusts overall print position | |
| +2.00MILLIMETER | horizontally in 0.25 |
| Default = 0.00 | increments. |
|
|
|
Y ADJUST | Adjusts overall print position | |
| +2.00MILLIMETER | vertically in 0.25 increments. |
| Default = 0.00 |
|
|
|
|
DUPLEX X ADJUST† | Adjusts overall print position | |
| +2.00MILLIMETER | of print face horizontally in |
| Default = 0.00 | 0.25 increments. |
|
|
|
DUPLEX Y ADJUST† | Adjusts overall print position | |
| +2.00MILLIMETER | of print face vertically in 0.25 |
| Default = 0.00 | increments. |
|
|
|
DRUM CLEANING | OFF | If you are experiencing |
| ON | horizontal white lines on your |
|
| printed pages, enter the |
|
| menu and temporarily |
|
| change this setting to ON, |
|
| then send a one page print |
|
| job. This will cause an extra |
|
| blank sheet to print, cleaning |
|
| the drum prior to printing. |
|
| Careful! Leaving this set to |
|
| ON will reduce the image |
|
| drum life. |
|
|
|
Sharp
110