Auto Switching ____________________

General Information

NOTE

When a paper tray runs out of paper, the printer automatically switches to the next available paper tray when

•more than one paper tray is installed and

•AUTO TRAY SWITCH is set to ON.

This setting is in the Tray Configuration Sub Menu of the top level menu Menus.

Refer to “Printer Menu” on page 53.

If you use the Multi-Purpose (MP) Tray, you must set a paper size for the MP Tray through the control panel. See “Changing Settings” on page 92.

In the menu, if “Media Type” is set to anything other than “Regular Paper”, you must select a specific “Tray”. You cannot use Automatic Selection.

If a paper tray (Tray 1) runs out of paper, your printer can automatically switch to another paper tray (MP Tray, optional Tray 2) loaded with the same type of paper. This is called Auto Switching.

This feature is enabled either through the printer menu or the printer driver.

Application settings override driver settings. Driver settings override printer menu settings.

For more information,

Printer Menu: see page 53

Windows, PostScript: see page 54

Windows, PCL: see page 55

Sharp AR-C265P User’s Guide

52