System Configuration Menu
Note: Factory default settings are shown in bold.
Items | Settings | Explanation |
|
|
|
|
|
|
POW SAVE | 5 | Adjusts the time before the printer |
TIME | 15 | automatically switches into power saving |
| 30 | mode. In this mode power consumption |
| 60 | is reduced, but when a job is sent the |
| 240 | printer will require a |
|
| to 1 minute before printing can begin. |
|
|
|
CLEARABLE | ON | When ON, |
WARNING | JOB | requests for a different paper size, can |
|
| be cleared by pressing the ON LINE |
|
| button. When set to JOB, they are only |
|
| cleared when the print job resumes. |
|
|
|
MANUAL | OFF | Specifies how many seconds the printer |
TIMEOUT | 30 | will wait for paper to be fed before |
| 60 | cancelling the job. |
|
|
|
WAIT TIMEOUT | 5 to 300 SEC | Specifies how many seconds the printer |
| Default = 90 | will wait when received data pauses |
| seconds | before forcing a page eject. |
|
|
|
LOW TONER | CONTINUE | Specifies whether the printer should |
| STOP | continue printing after a low toner |
|
| condition is detected. If you change this |
|
| to STOP, when low toner is detected, the |
|
| printer goes off line. |
|
|
|
JAM RECOVERY | ON | Specifies whether the printer should |
| OFF | perform jam recovery after a paper jam |
|
| has occurred. If ON, the printer will |
|
| attempt to print again any pages lost due |
|
| to a paper jam once the jam has been |
|
| cleared. |
|
|
|
ERROR REPORT | ON | Change this to ON if you wish the printer |
| OFF | to print the error details when an error |
|
| occurs. |
|
|
|
Sharp
105