Printer takes a long time to start printing
Possible cause | Remedy |
|
|
|
|
The printer has to | In the printer menu settings, set power save to |
warm up returning | a higher value to increase the length of time |
from power save mode. | before entering power save mode (SYS CONFIG |
| MENU → POW SAVE TIME). |
|
|
The image drum | Wait until this process has been completed. |
carries out a cleaning |
|
process to ensure print |
|
quality, which takes |
|
time. |
|
|
|
The fuser unit adjusts | Wait until this process has been completed. |
temperature, which |
|
takes time. |
|
|
|
The printer is | Wait until this data is processed. |
processing data from |
|
another interface. |
|
|
|
Printing cancels ___________________
Possible cause | Remedy |
|
|
|
|
The printer interface | Replace the printer interface cable. |
cable is faulty. |
|
|
|
The time out setting is | Reset time out in the menu to a higher value |
too short. | (SYS CONFIG MENU → WAIT TIMEOUT). |
|
|
Sharp
158