Check to see if saved Driver Settings are used____________________________
You can make changes to the driver settings and save them (under a named driver) for later use. You can do this if you are using PCL and/or Mac drivers.
Before making changes to driver settings, always check to see if a Named Driver is being used.
To do this:
1.Open the file you want to print.
2.Click File → Print.
3.Select your printer.
4.Click Properties.
5.Click the Setup tab (if necessary).
6.Look at the list below Driver Settings. If you see any name other than Default, a Named Driver is being used.
7.If a Named Driver is being used, you can
select “Default” in the list below Driver. This restored all driver settings to the factory defaults. You can then proceed with your changes.
proceed with your changes and not save them. Use the changes for only a single print job.
proceed with your changes and save them as the same Named Driver.
proceed with your changes and save them under a new Named Driver.
Sharp
167