
Example: Power Save Time
To change the time interval for the printer to wait before going into Power Save mode (default setting is 60 MIN):
1.Press + to enter the menu mode.
2.Press + and/or – repeatedly until you see
SYS CONFIG MENU
3.Press ENTER to go into the Sys Config Menu.
POW SAVE TIME |
|
60 MIN | * |
4.Press ENTER to select the Power Save Time item.
The value on the second line of the display begins flashing.
POW SAVE TIME |
|
60 MIN | * |
5.Press + repeatedly until the interval (e.g., 240 MIN) you wish to select appears on the second line.
POW SAVE TIME 240 MIN
6.Press ENTER to select the new setting:
An asterisk appears on the second line of the display.
POW SAVE TIME |
|
240 MIN | * |
7.Press ON LINE to engage the new setting and to exit the menu.
The printer returns to standby mode.
Sharp
93