USB Problems _____________________
Cannot configure for USB connection
NOTE
Windows NT 4.0 does not support USB. Windows 98 upgraded from Windows 95 may not support USB.
Possible cause | Remedy |
|
|
|
|
USB cable does not meet | Use USB cable to specification Ver.2.0. |
specifications. |
|
|
|
Interface is disabled. | Check that USB interface is set to Enable in |
| the menu (USB MENU → USB → ENABLE). |
|
|
Configuration procedure | Configure again from the beginning. |
was not correctly |
|
followed or cancelled. |
|
|
|
USB cable is | Reconnect or try another cable. |
disconnected or faulty. |
|
|
|
A USB hub is being used. | The printer cannot be used with a USB hub. |
| Connect the printer and computer directly. |
|
|
The USB cable is | Make sure the USB cable is plugged into the |
installed in the Ethernet | black USB port (1) on the printer: |
port. |
|
|
|
Sharp
154