Network Menu
Note: Factory default settings are shown in bold.
Item | Settings | Explanation |
|
|
|
|
|
|
TCP/IP | ENABLE | Enables or disables this network |
| DISABLE | protocol. |
|
|
|
NETBEUI | ENABLE | Enables or disables this network |
| DISABLE | protocol. |
|
|
|
IP ADDRESS | AUTO | Change this to Manual to specify the IP |
SET | MANUAL | address through the front panel (see |
|
| next entry). Required for |
|
| networks. |
|
|
|
IP ADDRESS | xxx.xxx.xxx.xxx | Current assigned IP address. To |
| Default = | change: |
| 198.168.100.100 | • Press ENTER. |
|
| • Use +/– keys to increment first |
|
| octet. |
|
| • Press ENTER to move on to the next |
|
| octet. |
|
| • Use +/– keys to increment second |
|
| octet. |
|
| • Press ENTER to move on to the next |
|
| octet. |
|
| • Use +/– keys to increment third |
|
| octet. |
|
| • Press ENTER to move on to the last |
|
| octet. |
|
| • Use +/– keys to increment 1st |
|
| octet. |
|
| • Press ENTER to register the new |
|
| address. |
|
|
|
SUBNET MASK | xxx.xxx.xxx.xxx | Current assigned subnet mask. To |
| Default = | change, proceed as above. |
| 255.255.255.000 |
|
|
|
|
GATEWAY | xxx.xxx.xxx.xxx | Current assigned gateway address. To |
ADDRESS | Default = | change, proceed as above. |
| 192.168.100.254 |
|
|
|
|
Factory Default | [EXECUTE] | Initializes the network card. |
|
|
|
WEB/IPP | ENABLE | Enables or disables Web config. facility |
| DISABLE | and Internet Printing Protocol. |
|
| This item will not appear in the menu if |
|
| TCP/IP is set to DISABLE. |
|
|
|
Sharp
107