Windows
PostScript
You cannot make changes to the driver settings and save them under a named driver.
PCL
1.Next:
Windows XP: Click Start → Settings → Control Panel → Printer and Other Hardware → Printers & Faxes.
Windows Me/NT/XP/98/2000: Click Start → Settings → Printer.
2.Next:
Windows XP: Right click Sharp
Windows 2000: Right click Sharp
Windows Me/98: Right click Sharp
Windows NT: Right click Sharp
3.Change each setting.
4.On the Setup tab, under Driver Settings, click Add.
5.At Setting Name, enter the desired name.
6.You can save your media (paper) selection as part of your named driver. To do this, select Form Information is Kept.
7.Click OK.
8.Under Driver Settings, select a named setting to use.
9.Click OK.
10.Close the dialog screen.
Sharp
166