Sharp AR-M351U AR-M451U AR-M351N AR-M451N specifications Programming and editing paper types

LOADING PAPER

Programming and editing paper types

To program or edit the name of a paper type or set paper attributes, follow the steps below.

1 Follow steps 1 and 2 of "Setting the paper type and paper size" (page 2-5)

2 Touchkey. the [PAPER TYPE REGISTRATION]

OK

PAPER TYPE REGISTRATION

3 Select the paper type that you wish to program or edit.

CUSTOM SETTINGS

TRAY 2 TYPE/SIZE SETTING

SELECT THE PAPER TYPE

USER	TYPE	1	USER TYPE 2	USE
USER	TYPE	5	USER TYPE 6	USE

4 Touch the [TYPE NAME] key.

						A character entry screen
PAPER TYPE REGISTRATION
						appears.
	No.01
						Enter a	type	name
		TYPE NAME		USER TYPE 1
						(maximum	of	14
			FIXED PAPER SIDE		DISAB
						characters). (See		page
			DISABLE STAPLE		DISAB	7-26 to enter characters.)

"FIXED PAPER SIDE" : Select when paper is to be loaded print side down in the tray. Make sure a checkmark does not appear when paper is to be loaded print side up.

•If the two-sided function is prohibited in "DISABLING OF DUPLEX" in the key operator programs (page 11 of the Key operator’s guide), do not use this setting.

"DISABLE DUPLEX" : Prohibits two-sided printing. Enable when the back side of the paper cannot be printed on.

"DISABLE STAPLE" : Prohibits	stapling.	Enable
when using special		papers
such as transparency film and
label sheets.
"DISABLE PUNCH" : Prohibits	punching.	Enable
when using special		papers

such as transparency film and label sheets.

NOTE

"FIXED PAPER SIDE" and "DISABLE DUPLEX" cannot be simultaneously enabled.

6 Touch the [EXIT] key to exit the programming/editing procedure.

CANCEL EXIT

DISABLE DUPLEX

2

DISABLE PUNCH

5 Set the attributes of the paper tray.

PAPER TYPE REGISTRATION

No.01

TYPE NAME USER TYPE 1

Touch the checkboxes to the left of the items to select them.

FIXED PAPER SIDE	DISAB
DISABLE STAPLE	DISAB

2-7