Sharp AR-M351U AR-M451U AR-M351N AR-M451N Removing AN Original Misfeed, Check location a

REMOVING AN ORIGINAL MISFEED

Removing a misfed original from the automatic document feeder

If an original misfeed occurs in the automatic document feeder, follow the steps below to remove the misfed original.

NOTES

●For misfeed removal in the main unit and other peripheral devices, see page 2-17

●When a misfeed occurs, touch the [INFORMATION] key to display detailed information for misfeed removal.

Check locations A and B in the diagram at left to remove the original.

1 Removing misfeeds from each location.

2 Open and close the document feeder.

●Check location A

Document feeding area cover

Open the document feeding area cover and gently remove the misfed original without tearing it.

Close the cover securely so that cover clicks into place.

Opening and closing the

cover clears the misfeed display. Copying cannot be resumed until this

step is performed. However, this step is not

necessary after a

misfeed is removed from location B.

A message may appear indicating the number of originals which must be returned to the document feeder tray. Return the originals to the document feeder tray and press the [START] key.

●Check location B

●Misfeed in the transfer unit

Open the document feeder and turn the green rotating knob in the direction of the arrow to remove any misfed originals.

2-22