Sharp AR-M351U AR-M451U AR-M351N AR-M451N Checking the staple unit, Open the finisher compiler

FINISHER

■Checking the staple unit

If the message "CHECK THE STAPLER UNIT" or "CHECK STAPLER POSITION OR STAPLER JAM" appears, follow the procedure below.

1 Open the finisher compiler.

Release the latch to

open the finisher compiler.

7 Raise the lever at the end of the staple box.

Remove the top staple if it is bent. If bent staples remain, a staple jam will occur again.

2

3

4

5

6

Remove the misfed paper from the stapler compiler.

Be careful not to tear the misfed paper during removal.

Close the finisher compiler.

Open the finisher front cover.

Turn the staple unit to face up.

Pull the release lever for the staple box and remove the box.

8 Return the lever to its original position.

3

9 Reinstall the staple box.

Push the staple box in until it clicks into place.

10While pushing the staple unit release lever to the left, rotate the staple unit to face down.

When reinstalling the staple box, push it in until it clicks into place.

11Close the front cover.

NOTE

Make a test print or copy in the staple sort mode to ensure that stapling is performed properly.

3-11