Sharp AR-M351U AR-M451U AR-M351N AR-M451N specifications Using the finisher functions

FINISHER

Using the finisher functions

When the [OUTPUT] key on the main screen of copy mode is touched, a screen for selecting the sort/group/staple sort functions and selecting an exit tray will appear. As a selection is made, the touch key for the selection will be highlighted.

OUTPUT

SORT

STAPLE

SORT

GROUP

(1) (2) (3)

(1)[GROUP] key (See page 3-8.)

When Group is selected, all copies of the same original will be grouped.

(2)[STAPLE SORT] key (See page 3-8.)

When Staple Sort is selected, sorted sets will be stapled and delivered to the offset tray. (They will not be offset stacked.)

(3)[SORT] key (See page 3-8.)

When Sort is selected, sets of copies will be sequentially delivered.

(4)Icon display

An icon representing a selected function (sort, staple sort or group) is displayed.

		(8)
	OK
		(7)
TOP TRAY

OFFSET	(6)
TRAY
OFFSET

(4)(5)

(5)[OFFSET] key (See page 3-8.)

If Offset is checked, offset is enabled. If not checked, offset will not function. If staple sort is selected, the check mark of offset will be automatically cancelled. If the staple sort function is selected, the checkmark in the offset checkbox is automatically removed.

(6)[OFFSET TRAY] key (See page 3-8.)

When the offset tray is selected, copies will be delivered to the offset tray. When staple sort is selected, the offset tray will be automatically selected.

(7)[TOP TRAY] key

When top tray is selected, copies will be delivered to the top tray.

3

(8)[OK] key

Press to close the output screen and to return to the main screen.

3-9