Sharp AR-M351U AR-M451U AR-M351N AR-M451N Staple cartridge replacement and staple jam removal

SADDLE STITCH FINISHER

Staple cartridge replacement and staple jam removal

When the staple cartridge becomes empty or staples become jammed, a message will appear in the message display of the operation panel.

Follow the procedure below to replace the staple cartridge or remove jammed staples.

■Staple cartridge replacement

1 Open the front cover.

2 Pull out the stapler section.

3 Turn roller rotating knob A in the direction of the arrow to move the staple unit to the front.

Turn the roller rotating knob until the triangle mark is aligned with the index.

Roller rotating

knob A Staple unit

4 Remove the empty staple box.

5 Remove the empty staple cartridge.

Press the lock button to unlock the staple box cover and remove the staple cartridge.

NOTE

If staples remain, the staple cartridge cannot be removed.

6 Insert a new staple cartridge into the staple box.

After inserting the staple cartridge, press down on the staple box cover to lock the cartridge in place.

NOTES

●Do not remove the tape from the cartridge before inserting the staple cartridge into the box.

● Make sure that the staple cartridge is secured	3
firmly.

●When reinstalling the staple box, push it in until it clicks into place.

7 Remove the tape from the staple cartridge by pulling it straight.

8 Insert the staple box.

Push the staple box in until it clicks into place.

9 Push the stapler section back into the finisher.

10Close the front cover.

NOTE

Make a test print or copy in the staple sort mode to ensure that stapling is performed properly.

3-19