Sharp AR-M351U AR-M451U AR-M351N AR-M451N specifications To return the ratio to 100%

FILE

QUICK FILE

REDUCTION/ENLARGEMENT/ZOOM

6 Make sure that an appropriate paper size has been selected based on the selected ratio.

ORIGIN L

AUTO

EXPOSURE

8 If needed, touch the [FILE] key or the [QUICK FILE] key.*

*Can only be used on the AR-M351N/AR- M451N, or when the document filing function has been added.

AUTO A4

Auto paper select display

Either key can be touched to store the

PAPER SELECT

64%

COPY RATIO

NOTE

If the auto paper select display does not appear, a tray with the correct size of paper for the selected ratio will not be automatically selected.

7 Use the numeric keys to set the desired number of copies.

Up to 999 can be set.

If you are only making a

single copy, the copy can be made with the copy number display

showing "0".

Use the [C] (clear) key to

cancel an entry if a mistake has been made.

scanned document image on the machine's hard disk. The stored image can be re-used later.

For more information on this function, see "Document filing function" in chapter 7.

If the [FILE] key is greyed out, only the [QUICK FILE] key can be selected.

When you touch the [QUICK FILE] key, a message asking you to confirm the save will appear. Touch the [OK] key in the message screen and go to the next step.

If you wish to cancel the save, touch the [QUICK FILE] key after touching the [OK] key so that the [QUICK FILE] key is no longer highlighted.

9 Press the [START] key.

If you placed the original on the document glass, set the output to "Sort",

and pressed the [START] key, you must touch the [READ-END] key after all pages of the

original have been scanned. (Step 8 on page 4- 12)

To return the ratio to 100%

To return the ratio setting to 100%, touch the [COPY RATIO] key to display the ratio menu and then touch the [100%] key. (Steps 2 and 3 on page 4-16.)

4

4-17